 HomeNewsIntroduction and application of DAYUE Ejector Pins & Sleeves

Introduction and application of DAYUE Ejector Pins & Sleeves

2016-01-20

Introduction and application of DAYUE Ejector Pins & Sleeves

DAYUE Ejector Pins is used with the Sleeves to call the Ejector Pins & Sleeves, which is one of the plastic mold accessories. The Ejector Pins & Sleeves are the Ejector Pins in the Sleeves and needle assembly. The Ejector Pin and Sleeves are a kind of ejector manufactured for ejecting the glue Metal rod for glue products. The product is continuously ejected in the mold running at high speed, and the telescopic movement of the Sleeves is used for wear or processing.

DAYUE Ejector Pins & Sleeves material is divided into: SKD61, SKH-51,1.2343,1.2344,1.3343, FDAC, etc., such as SKH51, hardness can reach 58-60HRC. The needle made of high-quality high-speed steel has a beautiful metallic luster. The production process of Ejector Pins & Sleeves is similar to thimble. The structural size of the Ejector Pins & Sleeves is very different from the structural size of the Ejector Pins. The size of the big head generally has irregular sizes. The standard of the Ejector Pins & Sleeves head is: HASCO, FIBRO,DAYTOM,MISUMI, DME, etc. Made to order

DAYUE Ejector Pins & Sleeves need to be sprayed with rust inhibitors to prevent rust. Generally, they are packed in oil-sealed bags. During use, if the mold is left idle for a long time, attention should be paid to rust prevention. However, the Ejector Pins of the Sleeves has the characteristics of wear resistance after nitriding, and it can withstand high temperatures above 1200 degrees.

171

Previous: Types of DAYUE punch needle punch dies

Next: Design standard of Ejector Pins & Sleeves by Dayue Precision Technology (Dongguan) Co., Ltd.